1.13. A three-point seat belt of the driver with the inertial mechanism of blocking

Fastening of a seat belt

To fasten a seat belt, extend it from the involving mechanism and insert a belt level (a latch uvula) to the lock before click.

Fastening of a buckle of a seat belt

The seat belt automatically chooses the required length only after you manually adjust a zone belt so that it fitted your hips tightly. After putting on of such belt it automatically follows the slow movements of your body, but in case of sudden or strong breakthrough the belt is automatically blocked for deduction of the fastened person. The belt will be also blocked if you sharply pull it forward. Check reliability of fastening of the lock of a seat belt and that the seat belt was not overwound.

Adjustment of a seat belt

Never put on a zone seat belt across an abdominal cavity. In case of accident the belt can sharply crash into a stomach and increase risk of getting injured. When the belt is located too highly, danger that you will slip out from under a belt in case of the road accident or at sharp braking increases. It can lead to damage of the car, serious injuries or death. Both hands should not be at the same time under or over a belt. One hand has to be under, and another over a belt, as shown in the drawing. Never pass a shoulder strap near at hand which is closer to a door.

Arrangement of a bederny part of a seat belt

Otstegivaniye of a seat belt

For an otstegivaniye of a seat belt undertake a level (a latch uvula) and press the button on the belt lock. When the belt is unfastened, it automatically cleans up the involving mechanism.

If it does not occur, check a belt for lack of twisting and repeat attempt again.

Otstyogivany forward seat belt