1.25. Switch of a cleaner and washer of a windshield

The switch can be installed in three following situation:

1 – faltering mode of the movement of brushes;
2 – slow movement of brushes;
3 – bystry movement of brushes.

Provisions of the switch of screenwashes

Prevention

For prevention of damage of system of screen wipers, do not try to clear heavy rainfall in the form of snow or ice, and the collected snow or ice needs to be cleared manually. If there is only an insignificant snow layer or ice, include a heater in the mode of heating of a windshield and kindle snow or ice before use of screen wipers.


Work of a washer of a windshield

The washing liquid will move on a windshield when moving the lever of the switch of a screen wiper / washer towards a steering wheel. If the car is equipped with a faltering operating mode of brushes of a screen wiper, then at inclusion of a washer of a windshield, along with supply of the washing liquid screen wipers automatically will make two courses while the switch of a screen wiper / washer of a windshield is released.

The direction of movement of the switch of screenwashes for inclusion of windscreen washers

If the car is not equipped with a faltering operating mode of brushes of a screen wiper, then at inclusion of a washer of a windshield only supply of the washing liquid will be carried out so far the switch of a screen wiper / washer of a windshield will be pressed.


Prevention

Do not include a smyvatel more than on 15 with or when in a washer reservoir there is no liquid.
In cold weather before using a screen wiper, be convinced that brushes of a screen wiper did not freeze to glass.
In areas where water freezes in the winter, for cleaning of a windshield use the nonfreezing washing liquid.


Removal of fogging of a windshield

For removal of the fog which settled on a windshield move the lever of the switch of a screen wiper / washer of a windshield up. Brushes of a screen wiper will make one course.

The direction of movement of the switch of screenwashes for removal of fogging of a windshield

Work of a screen wiper with a changeable interval of an operating mode of brushes of a screen wiper

To use an operating mode of brushes of a screen wiper with a changeable interval, move the screen wiper switch to the provision of "INT" (The faltering mode). In this position of the switch, the interval of a faltering operating mode of brushes of a screen wiper can be changed in 5 provisions by turn of an adjusting castor of an interval of the faltering mode on the switch lever.

The direction of turn of an adjusting castor of an interval of the faltering mode on the switch lever