db57d230

1.4. Anticreeping system

This system is intended for prevention of unauthorized penetration into the car. This system has three states: the first "Readiness", the second "Alarm system" and third state "Shutdown". At operation of anticreeping system, the sound alarm system (siren) turns on and indexes of turns begin to blink.

Ready state

Park the car and switch off the engine. Bring system to a ready state in the following order:

– take out a key from the ignition lock;
– be convinced that the cowl and a trunk lid are blocked;
– block doors by means of the transmitter of system of remote control of locks of doors.

After performance of the listed above actions, indexes of turns will blink once, indicating that the system is brought to a ready state.


Prevention

If any of doors, the trunk lid or a cowl are open, the system will not be brought to a ready state.
If it occurred, bring system to a ready state as it is stated above.


Reduction can only be carried out to readiness of anticreeping system when all passengers left interior of the car

Prevention

You do not bring system to a ready state until all passengers do not leave interior of the car. When are in interior of the car the passenger(s) when he(they) leave interior of the car, the sound alarm system (siren) can work.


Condition of the alarm system

The alarm system works when the car is parked and the system is in a ready state in one of the following cases.

1) The forward or back door without use of the transmitter or the ignition key opens.
2) The trunk lid without use of the ignition key opens.
3) The cowl opens.

In these cases the sound alarm system (siren) will work and indexes of turn will blink during 30 pages. It can repeat 3 times. To switch off system, unblock doors by means of the transmitter or the ignition key.

Prevention

Do not try to start the engine when the anticreeping system is in a ready state.


CONDITION OF SHUTDOWN

The system can be disconnected, having unblocked a door of the driver or passenger pressing the UNLOCK button ("to Unlock") on the transmitter or the ignition key. After that indexes of turn will blink two times that indicates shutdown of system.

Arrangement and purpose of buttons on the transmitter of remote control of locks of doors

Prevention

After shutdown of system, it can be brought to a ready state, having only made the operations stated above for reduction of anticreeping system in a ready state.


State panic

PERFORMANCE ORDER
1. Press the LOCK button ("Panic") on the transmitter.
2. The sound alarm system will work and indexes of turn will begin to blink.
3. To switch off system, again press the LOCK button ("Panic") on the transmitter.

System of remote control of locks of doors

Locking of doors

PERFORMANCE ORDER
1. Close all doors.
2. Press the LOCK button ("to Lock") on the transmitter.
3. Locks of all doors will be blocked. At the same time indexes of turn will blink once that indicates reduction of system in a ready state.

Unlocking of doors

PERFORMANCE ORDER
1. Press the UNLOCK button ("to Unlock") on the transmitter.
2. Locks of all doors will be unblocked. At the same time indexes of turn will blink two times that indicates shutdown of system.