db57d230

1.55. System of heating and ventilation

The panel of system of heating and ventilation is shown in the drawing.

Panel of system of heating and ventilation:

1 – switch of operating modes of the fan;
2 – handle of the choice of the mode of ventilation;
3 – handle of adjustment of air temperature;
4 – switch of the choice of the mode of an intake of air.

SWITCH OF OPERATING MODES OF THE FAN

The switch is intended for inclusion and switching off of the fan and the choice of frequency of its rotation. Frequency of rotation of the fan and, therefore, size of the air stream arriving from system of ventilation can change manually by turn of the switch between provisions "1" and "4".

Switch of operating modes of the fan

SWITCH OF THE CHOICE OF THE MODE OF THE INTAKE OF AIR

The switch is intended for switching of the modes of ventilation between the mode of an intake of external air and the mode of recirculation.

Switch of the choice of the mode of an intake of air

Mode of an intake of external air

The external air heated or cooled depending on the choice of other functions comes to interior of the car.

Air recirculation mode

There is a recirculation of air in interior of the car and its heating or cooling depending on the choice of other functions.
Prevention

Use of the mode of recirculation of air can lead to fogging wind and side glasses for a long time, and air in interior of the car will become zastoyaly. Moreover, long operation of the conditioner in the mode of recirculation of air can lead to the fact that air in the car will become too dry.


CHOICE OF THE MODE OF VENTILATION

The handle of the choice of the mode of ventilation is used for the choice of the direction of an air stream.

 

To the area of the head

The air stream via deflectors comes to the top part of interior of the car.

To the area of the legs / head

Air comes via deflectors to the top part of interior of the car and to the area of legs. It allows at the same time warm air to move via deflectors to legs, but not heated or poorly heated air via deflectors in the top part of salon.

To the area of legs

Air comes only to the area of legs.

To the area of legs / to deflectors of heating of a windshield and side glasses

Air comes via deflectors to the area of legs, and also to a windshield and glasses of doors. At the choice of the mode (to deflectors of heating of a windshield and side glasses) the conditioner will be switched automatically on.

To deflectors of heating of a windshield and side glasses

Air via deflectors arrives only to a windshield and glasses of doors of the car. At the choice of the mode (to deflectors of heating of a windshield and side glasses) the conditioner will be switched automatically on.

HANDLE OF ADJUSTMENT OF AIR TEMPERATURE

The handle is used for inclusion and switching off of a heater and the choice of desirable air temperature.

Handle of adjustment of temperature of a vokhdukh

Handles of management of a heater

For normal work of a heater, install the switch of the choice of the mode of an intake of air in the mode of an intake of external air and the handle of the choice of the mode of ventilation in situation (to the area of legs).

Handles of management of a heater

For more bystry heating, install the switch of the choice of the mode of an intake of air in the air recirculation mode

In case of fogging of glasses, install the handle of the choice of the mode of ventilation in situation (to deflectors of heating of a windshield and side glasses) (at the same time, the conditioner will be switched automatically on), and the switch of the choice of the mode of an intake of air in the mode of an intake of external air.

For the maximum heating, install the handle of adjustment of air temperature in situation Warm (Hot air).

The air supply mode to the area of the legs / head

The air supply mode to the area of the legs / head allows at the same time warm air to move via deflectors to legs, and poorly heated air via deflectors in the top part of salon. To include this mode set handles in the following provisions:

Position of handles in the air supply mode to the area of the legs / head

– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air;
– install the handle of the choice of the mode of ventilation in situation (to the area of the legs / head);
– install the handle of adjustment of air temperature between provisions of Cool (Cold air) and Warm (Hot air).

Ventilation mode

To include system of ventilation install handles in the following provisions:

Position of handles in the ventilation mode

– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air;
– to direct all air stream via deflectors of heating of a windshield and side glasses, install the handle of the choice of the mode of ventilation in situation (to the area of the head);
– as the switch of operating modes of the fan choose the desirable frequency of rotation of the fan;
– install the handle of adjustment of air temperature between provisions of Cool (Cold air) and Warm (Hot air).

CENTRAL DEFLECTOR

The central deflectors of system of ventilation are located in the center of the dashboard.

To change the direction of an air stream turn the handle of management which is in the middle of the central deflector in desirable situation.

Directions of movement of the handle of management of the central deflector

SIDE DEFLECTOR

Side deflectors are located at the edges of the dashboard. To change the direction of an air stream turn the handle of management which is in the middle of the side deflector in desirable situation.

Directions of movement of the handle of management of the side deflector

REMOVAL OF HOARFROST / CONDENSATE (FOGGING)

Use this mode for removal of hoarfrost or condensate (fogging).

Position of handles in the mode removal of hoarfrost / condensate (fogging)

For removal of hoarfrost or condensate (fogging) from the inside of a windshield:

– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air in situation;
– install the handle of the choice of the mode of ventilation in situation to deflectors of heating of a windshield and side glasses (at the same time the conditioner will be switched automatically on);
– install the handle of adjustment of air temperature in desirable situation;
– install the switch of operating modes of the fan between provisions "1" and "4".

For removal of hoarfrost or condensate (fogging) from outer side of a windshield:

– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air;
– install the handle of the choice of the mode of ventilation in situation (to deflectors of heating of a windshield and side glasses) (at the same time the conditioner will be switched automatically on);
– install the handle of adjustment of air temperature in situation Warm (Hot air);
– install the switch of operating modes of the fan in situation 3 or 4.

COUNCILS FOR MANAGEMENT OF SYSTEM OF VENTILATION

For prevention of hit of dust or undesirable smells in interior of the car, temporarily install the switch of the choice of the mode of an intake of air in the air recirculation mode.

For maintenance of freshness of air in the car do not forget to return the switch of the choice of the mode of an intake of air to the mode of an intake of external air.

It promotes cheerfulness and a comfortable condition of the driver.

Air for system of heating / cooling moves through the lattices located just before a windshield. You watch that these lattices were free from leaves, snow, ice or other foreign objects.

CONDITIONER SWITCH

The conditioner turns on pressing the conditioner switch control panels of the heater / conditioner.

Conditioner switch

OPERATION OF THE CONDITIONER

Cooling

Use of the conditioner for cooling of air in interior of the car:

Arrangement of handles during the operation of the conditioner in the cooling mode

– having turned the switch of operating modes of the fan, switch off the fan;
– pressing the switch of the conditioner turn on the conditioner. At the same time in a combination of devices the control lamp of turning on of the conditioner will light up;
– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air;
– install the handle of adjustment of air temperature in situation Cool (Cold air). This situation provides the maximum cooling of air. Temperature of the air coming to salon can change movement of the handle towards situation Warn (Hot air);
– as the switch of operating modes of the fan choose the desirable frequency of rotation of the fan. For the maximum cooling, turn the switch of operating modes of the fan in the provision of one of the largest speeds or temporarily install the switch of the choice of the mode of an intake of air in the air recirculation mode.

The draining heating

For the draining heating perform the following operations:

Arrangement of handles during the operation of the conditioner in the mode of the draining heating

– having turned the switch of operating modes of the fan, turn on the fan. Pressing the switch of the conditioner turn on the conditioner. At the same time in a combination of devices the control lamp of turning on of the conditioner will light up;
– install the switch of the choice of the mode of an intake of air in the mode of an intake of external air;
– install the handle of the choice of the mode of ventilation in situation to the area of the head;
– as the switch of operating modes of the fan choose the desirable frequency of rotation of the fan;
– for acceleration of process turn the switch of operating modes of the fan in the provision of one of the largest speeds;
– establish by the handle of adjustment of air temperature the size of desirable temperature.

Councils for control of the conditioner

If air in the car too hot, open all windows for several minutes to cool air in interior of the car.

During the operation of the conditioner all glasses have to be closed not to allow hit of warm air in interior of the car.

At the slow movement of the car, for example in traffic jam, include lower transfer. It will increase the frequency of rotation of a bent shaft of the engine that in turn will increase the frequency of rotation of the compressor of the conditioner.

On steep slopes switch off the conditioner to exclude a possibility of an overheat of the engine.

Or during irregular use of the conditioner, turn on the conditioner in the winter period of time for several minutes once a month. It prevents deterioration in greasing of internal details of the compressor and provides maintenance of air conditioning system in good shape.