db57d230

1.63. Automatic transmission

Provisions of the lever of switching of the modes automatic transmission

The highly effective automatic transmission of HYUNDAI has four transfers for advance and one transfer of a backing. It has the usual scheme of gear shifting shown in the figure 117. At night, in the first position of the multipurpose switch on the scheme of gear shifting the indicator will burn corresponding to the chosen range of transfers.
Prevention

During the movement of the car it is impossible to transfer the selector lever to situation "P" or "R".

For movement of the selector it is necessary to press the button, at the same time pressing a brake pedal.


For movement of the selector it is necessary to press the button.

For movement of the selector the button does not need to be pressed.



For the maximum economy of fuel, accelerate smoothly. The automatic transmission will automatically include the second, third and raising transfers.

PURPOSES OF PROVISIONS OF THE SELECTOR

"Р" – Parking

Use this situation for keeping of the car on the place during the parking or start of the engine. At the parking of the car, turn on the parking brake and transfer the selector to situation "P" (Parking).


Prevention

Do not move the selector to situation "P" (Parking) until the car is completely stopped. The neglect this rule can lead to breakage of the automatic transmission.



"R" – Backing:

Use this situation for the movement by a backing. You transfer the selector lever to situation "R" (Backing) only after a full stop of the car.

"N" – Neutral situation:

In this position of the selector the automatic transmission is switched-off. In this situation it is possible to start the engine, however it is not recommended except cases when the engine decayed during the movement of the car.

"D" – "Movement", the main transfer:

This position of the lever of the selector of the automatic transmission is the basic for the movement. The automatic transmission will automatically include one of four transfers, providing the best profitability and power. If the speed of the car exceeds 95 km/h, never transfer the selector to situation "2" (The second transfer) or "L" (The lowering transfer).

"2" – the Second transfer:

Use this situation for movement along the slippery road, rise on an abrupt bias and for braking by the engine during descent from an abrupt bias. In this position of the selector, there is an automatic switching between the 1st and 2nd transfers. It means that there is no switching to the 3rd transfer. However if the speed of the car exceeds a certain value, there is a switching to the 3rd transfer for prevention of excessive dispersal of the engine. Transfer of the selector to situation "D" ("Movement") returns normal gear shifting.

"L" – The lowering transfer:

This position of the lever of the selector of the automatic transmission is the basic at the movement on very abrupt biases and for braking by the engine at low speeds of the movement during descent from abrupt biases. At inclusion of the lowering broadcast "L", the transmission will temporarily remain in the range of the second transfer until the car reduces speed to the speed when inclusion of the lowering broadcast "L" is possible. At the movement in the mode "L" – ("The lowering transfer") do not exceed the speed of 50 km/h.


Prevention

For smooth and safe gear shifting, when translating the selector from situation "N" or "R" before including transfer, completely squeeze out a brake pedal.
To transfer the selector from situation "N" or "R" to any other situation, it is necessary to press a brake pedal completely.
You can always transfer the selector from situation "R", "N", "D", "2", "L" to situation "P".
You transfer the selector to situation "P" or "R" only after a full stop of the car.
Do not increase the frequency of rotation of a bent shaft of the engine when the selector is in the provision of transfer of a backing or one of provisions of the movement at the pressed brake pedal.
When translating the selector from situation "N" or situation "P" in another provisions "P", "D", "2", or "L" always press a brake pedal.
Do not use situation "P" instead of the parking brake. Always turn on the parking brake, you transfer the selector to situation "P" and switch off ignition when you leave the car, even for a second. Do not leave the car unguarded when the engine works.
Regularly check liquid level in the automatic transmission and add liquid if necessary.



Methods of the correct driving

You do not transfer the selector from situation "N" or "R" to any other situation
at the pressed accelerator pedal.

During the movement of the car it is impossible to transfer the selector lever to situation "P".

Before transferring the selector to situation "P", be convinced that the car is completely stopped.
You do not slide under a bias on neutral transfer. It is very dangerous. Always you hold transfer included in time of the movement of the car.

Avoid style of driving with frequent sharp braking, and you do not hold the left leg on a brake pedal constantly during driving. It conducts to an overheat of brakes and loss of efficiency of their work.
On long descents it is necessary to apply braking to prevention of an overheat of brakes the engine (including low gears).

At inclusion of a low gear, slightly brake the car. Otherwise the low gear can not join.

Always use the parking brake. Do not rely on transfer of the selector to situation "P" for prevention of the movement of the car.

Be especially careful at movement along the slippery road to time of braking, acceleration and gear shifting. On the slippery road, sharp change of speed of the car can lead to loss of coupling of wheels of the car with the road and loss of control over the car.

Turn on the switch of the raising transfer for ensuring good fuel profitability and smoothness of the course. In case of need braking by the engine in the range of "D" or in need of the repeating switching between the 3rd and 4th transfers to rise time for a small bias, it is recommended to switch off the raising transfer. After that turn on the switch of the raising transfer.

Prevention

At loss of control over the car at high speeds the risk of a turning of the car considerably increases.
Loss of management often arises when two or more wheels move down from a road track, and the driver tries to return the car back on a road track.
In case your car moved down from a road track, avoid sharp turn of a steering wheel. Instead, reduce car speed before again driving on the road.



At turning on of the switch of the raising transfer, the transmission will automatically include the second, third and raising transfers. When the switch of the raising transfer is in the provision of "OFF" (Off), the raising transfer will not be included. Under normal conditions the movement the selector has to be in situation "D", and the switch of the raising transfer has to be switched on. If you need to make sharp acceleration, press an accelerator pedal against the stop. The transmission will automatically include a low gear depending on the speed of the car and loading.