db57d230

1.7. Front seats


Prevention

You make sitting adjustment only on the motionless car. Non-compliance with this rule can lead to loss of control over the car and the road accident that in turn can lead to damage of the car, serious injuries or death.


Adjustment of longitudinal provision of forward sitting

To move sitting in longitudinal situation, lift the adjustment lever up. It you release sitting and will be able to move it forward and back to desirable situation.

After installation in desirable situation, release the lever of adjustment and slightly move sitting forward or back to record sitting in new situation.

Arrangement of the handle and direction of movement of a front seat forward / back

Adjustment of an inclination of a back of sitting

For a sitting back inclination, bend forward to remove the weight from a back of sitting and pull the lever of adjustment of an inclination of a back of sitting up. Press a back of sitting and establish it in desirable situation. To record a sitting back in new situation, release the lever of adjustment of a back of sitting.

Arrangement of the lever and direction of adjustment of an inclination of a back of front seats

Prevention

To reduce risk of developing of a trauma at the road accident (accident) or sharp braking, seatbacks of the driver and the forward passenger have to be in the situation whenever possible close to vertical. Efficiency of protection of seat belts and inflatable safety cushions can be considerably reduced when the back of sitting is inclined.
There is a high probability of the fact that when the back of sitting is inclined, the driver and the forward passenger can slip out from under a seat belt that will entail serious injuries at collision of the car during the road accident.


Adjustable head restraints

If it is necessary to put forward a head restraint up, extend it to desirable situation. If it is necessary to lower a head restraint, press a clamp and at the same time press a head restraint down to required position.

Adjustment of height of head restraints

Prevention

For reduction of probability of getting injured in case of collision establish height of head restraints so that its center was located as it is possible more precisely at the level of eyes. If between your back and a back of sitting there is a pillow or something similar, then it can increase distance between your head a head restraint and efficiency of head restraints in case of accident will be reduced.
It is dangerous to go by the car with incorrectly adjusted head restraints or at all without them. Be surely convinced of correctness of installation and adjustment of head restraints. Otherwise, receiving a serious trauma of area of a neck at the road accident is possible.


Adjustment lumbar subtime of sitting of the driver

For adjustment lumbar a subtime, turn, the lever of adjustment lumbar a subtime located on a back of sitting of the driver. For increase in force of support move the lever of adjustment lumbar a subtime towards a forward part of the car. For weakening of force of support move the lever of adjustment lumbar a subtime towards a back part of the car.

Arrangement of the handle and direction of adjustment lumbar subtime

Adjustment on height of a pillow of a seat of the driver

To lift or lower a forward part of a pillow of sitting, turn the forward handle forward or back. To lift or lower a back part of a pillow of sitting, turn the back handle forward or back.

Arrangement of the handle and the direction of adjustment on height of a pillow of a seat of the driver

Heating of seats

The device is intended for heating of front seats in cold season. With the ignition key in the provision of "ON" press any of switches on the back console for heating of either a driver's seat, or the passenger's seat.
In warm season or when heating of seats is not necessary, install switches in the provision of "OFF".

Access to a back seat on three-door models

For access to back sitting, it is necessary to incline a back of a front seat.
Pull the sitting back inclination lever from an external part of sitting of the forward passenger up, the back of sitting will bend forward and the seat will automatically move forward.

Passengers of back sitting can incline a back of forward sitting, having pressed the pedal shown in the figure 15.

Arrangement of the button (1) and pedal (2) for an inclination of a back of forward sitting for access to a back seat on three-door models

Prevention

The passengers sitting on back sitting have to be accurate and not press a pedal 2 during the movement of the car because that can lead to movement of a back of sitting forward and put a trauma to the passenger of forward sitting.