1.78. Technical characteristics of the car
SizesFor 4-door models |
For 3/5 door models | |
Dimensional length | 4235 | 4200 |
Dimensional width | 1670 | 1670 |
Dimensional height (without loading) | 1395 |
1395 |
Wheel base |
2400 | 2400 |
Track of forward wheels | 1435 | 1435 |
Track of back wheels | 1425 |
1425 |
Steering
Type | Rack |
Side play of a steering wheel | 0–30 mm |
Course of a steering rack | 134 mm |
Type of the pump of the hydraulic booster |
Bladed |
Power supply system
Capacity of the fuel tank | Liters |
45 |
Tires and wheels
Standard | 155/80 R13 |
Additional equipment | 175/70 R13 |
185/60 HR14 | |
Spare wheel | Full-size wheel |
Electric equipment
Rechargeable battery | MF45AH, MF55AH(12B) | |
Generator | 13,5 IN 80A | |
Starter | Automatic transmission | 0,9 kW |
Mechanical transmission | 0,7 kW |
Brake system
Type | Hydraulic, double-circuit with the vacuum amplifier of brakes |
Forward brakes | Disk |
Back brakes | Drum |
Parking brake | The drive of the parking brake mechanical, affects brake mechanisms of back wheels |
Engine
PARAMETERS | CHARACTERISTICS | |||
The engine with a working capacity of 1,5 cubic cm, with the distributed injection of fuel and one top camshaft (SOHC) | The engine with a working capacity of 1,5 cubic cm, with the distributed injection of fuel and two top camshafts (DOHC) | The engine with a working capacity of 1,3 cubic cm, with the distributed injection of fuel and one top camshaft (SOHC) | The engine with a working capacity of 1,3 cubic cm, carburetor | |
Engine type | Four-cylinder, line | |||
Idling (min.-1) | 800±100 |
750±100 | 800±100 |
850±100 |
Ignition advancing corner | 9 ° ±5 ° to VMT | 5 ° ±5 ° to VMT | 9 ° ±5 ° to VMT |
5 ° ±5 ° to VMT |
Operating procedure of cylinders | 1–3–4–2 |
Spark plugs
PARAMETERS | UNLEADED GASOLINE | ETHYLATED GASOLINE |
Type of spark plugs | NGK: BKR5ES-11 CHAMPION: RC10YC4 | NGK: BKR5E CHAMPION: RC10YC |
Gap between candle electrodes | 1,0–1,1 MM | 0,7–0,8 mm |
Card of lubricants
Parameter |
The standard on oil and cooling liquid |
Quantity | |
Engine oil | API SG or above | SAE 20W-40, 20W-50 (it is above -10 °C) | 3,3 l |
SAE 15W–40, 15W–50 (it is above -15 °C) | |||
SAE 10W-30(-25-40 °C) | |||
SAE 10W–40, 10W–50 (it is above -25 °C) | |||
SAE 5W–20*1, * 2 (it is below -10 °C) | |||
5AE5\L/-30*1 (нижеЮ°С) | |||
SAE 5W–40*1 (it is below 20 °C) | |||
* 1. It is limited to conditions of driving and the territory of sale. | |||
* 2. It is not recommended for work at the long movement at high speeds | |||
Consumption of engine oil |
Normal mode of operation | At most 1l/1500 km | |
Severe mode of operation | At most 1l/1000 km | ||
Mechanical transmission |
HYUNDAI GENUINE PARTS MTF 75W/90 (API GL–4) |
2,15 l | |
Automatic transmission | DIAMOND ATF SP–III or SK ATF SP–III | 6,1 l | |
Power steering | PSF–3 | As necessary | |
Brake fluid | DOT 3 or equivalent of DOT-4 | As necessary | |
Cooling liquid of the engine |
Ethylene glycol (for an aluminum radiator) |
5,5 l |
* Hyundai recommends to use the engine oil TEXACO, Castrol or equivalent.