11.1. Specifications

Suspension bracket

Forward suspension bracket
Type MacPherson with a cylindrical spring
Diameter of a wire x diameter x height of a cylindrical spring, mm 12,3х140х305/314,9
Identification color 12,3х140х305/314,9
Shock-absorber
Type Hydraulic
Course, mm 161
The damping force at 0,3 m/s Expansion, N 470±100
Compression, N 540±70
Size of tires 155/80 R13, 175/70 R13, 185/60 HR14
Diameter of a disk, mm 4,5JX13, 5Jx13, 5Jx14
Pressure of inflating of the tire, kPa 210
Back suspension bracket
Diameter of a wire x diameter x height of a cylindrical spring, mm 12,0х95,0х150,0
Spring height in a free state, mm 344
Identification color Yellow-1 line
Shock-absorber
Type Hydraulic
Course, mm 211
The damping force at 0,3 m/s Expansion, N 390±100
Compression, N 330±70

Angles of installation of wheels


Name
Forward wheels
Back wheels
Convergence, mm 0±3 3±2
Disorder 0 ° ±30' – 41 ° ±30'
Corner of a longitudinal inclination шкворня 1 °48 '±30'  
Tilt angle rotary шкворня 11 °03 '±30'  
Shift rotary шкворня, mm 5,8  

Wheels


Wheel beating Steel disks Aluminum disks
Radial, mm 0,6 0,3
Axial, mm 1,0 0,3

Moments of an inhaling, N • m


Nuts of fastening of a power shaft 220–250
Top nuts of fastening of a forward rack 20–30
It is resistant to the hinge 75–90
Самоконтрящиеся nuts are resistant 60–70
The spherical hinge of the lower lever to the hinge 60–72
Arm to the lower lever 95–120
Bolt of fastening of an arm of the lower lever 95–120
Bolt of fastening of an arm of the stabilizer of cross stability 17–26
Spherical hinge of a tip of steering draft 15–34
Nuts of fastening of draft of the stabilizer 35–45
Bolt of a back support to the lower frame 30–40
Nut of fastening of a back support 45–60
Top nut of fastening of a back rack 20–30
Lower nut of fastening of a back rack 75–90
Самоконтрящаяся nut of a back rack 45–50
Thirst of the back stabilizer for the stabilizer of cross stability 35–45
Bolt of fastening of an arm of the back stabilizer of cross stability 17–26
The lever of a back suspension bracket to the axis fastener 130–150
The lever of a back suspension bracket (A) to a body 100–120
The lever of a back suspension bracket (V) to a body 80–100
Nut of fastening of the back lever to the axis fastener 130–150
Nut of fastening of the back lever to an arm 100–120
The back lever to a body 40–50

Moments of an inhaling, N • m

Spherical hinge of the lower lever R-2 lubricant As it is required
Rack bearing No. 1 lubricant SAE J310a, NLGI As it is required