db57d230

11.5. Forward stabilizer of cross stability

Removal
PERFORMANCE ORDER
1. Remove a forward wheel.
2. Remove draft of the stabilizer.
3. Remove an arm of the stabilizer and the plug
4. Remove a back support of the engine.
5. Remove the stabilizer of cross stability.

Check
PERFORMANCE ORDER
1. Check the stabilizer of cross stability for lack of loss of elasticity and damages.
2. Check a condition of all bolts.
3. Check a protective cover of draft of the stabilizer for lack of cracks or damages.
4. Check torque which needs to be put for a provorachivaniye of a pin of the spherical hinge of draft of the stabilizer.

If there are cracks in a protective cover, replace it and add lubricant to the hinge.

Several times shake here and there a pin of the spherical hinge of draft of the stabilizer.

Torque: 1,7–3,2 N • m

If the torque exceeds admissible values, replace draft of the stabilizer.

If the torque is much lower than admissible value, the spherical hinge can be reused if it is not got jammed and has no excessive side play.


Installation
PERFORMANCE ORDER
1. Install the plug on the stabilizer of cross stability.
2. Level an arm in relation to the plug. Make sure that the arm reliably covers the plug.
3. Temporarily fix an arm of the plug and install the plug on the second side of the stabilizer.
4. Record draft of the stabilizer a wrench with an open pharynx on 14 mm and screw самоконтрящуюся a nut.