13:11. Brake pedal
1 – switch of stoplights;
2 – plugs; 		3 – arm;
4 - spring;
5 – pedal

Removal
PERFORMANCE ORDER
1. Remove the switch of stoplights.
2. Turn off nuts with a fillet (4EA) and a bolt (1EA) of fastening of an arm of a pedal of a brake.
3. Remove the forelock and remove a pin with a head and an opening under the forelock.
4. Remove brake pedal knot.

Check
PERFORMANCE ORDER
1. Check the plug for lack of wear.
2. Check a brake pedal for lack of curvatures.
3. Check a spring of return of a pedal of a brake for absence of damage.
4. Check the switch of stoplights

1) The ohmmeter connected to plugs of the switch of stoplights check its conductivity.
2) When pressing a plunger conductivity has to be absent and appear at release of a plunger.

Installation
PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
Prevention

Make sure that installed the forelock on a pin with a head and an opening under the forelock of draft of a pedal of a brake.

2. Establish knot of a pedal of a brake and fix by nuts with a fillet and a bolt.

Inhaling moment: 8–12 N • m

3. Check and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake.
4. Install the switch of stoplights.