db57d230

13:17. Parking brake

1 – lever of the parking brake;
2 – adjusting nut;
3 – cable of the parking brake.

Removal

PERFORMANCE ORDER
1. Remove the back console.
2. Turn off an adjusting nut and remove a cable of the parking brake.
3. Remove the switch of the parking brake.
4. Remove knot of the lever of the parking brake.
5. Remove a wheel.
6. Remove the brake drum.
7. Remove brake shoes.
8. Disconnect a cable of the parking brake from the lever on a brake shoe.
9. Remove the clip fixing a cover of a cable of the parking brake to a brake board.
10. Remove a pillow of back sitting.
11. Weaken clips of fastening of a cable of the parking brake and remove it from the car.

Check

PERFORMANCE ORDER
1. Check operation of the switch of the parking brake.
2. Check a ratchet of the lever of the parking brake for lack of wear.
3. Check a cable of the parking brake for lack of wear or damages.

Installation

PERFORMANCE ORDER
1. Check existence of marking on the left and right cables of the parking brake and establish them on the places.
2. Move the lever of the parking brake on a brake shoe completely back and establish springs.
3. Establish the condensing rings in the direction shown in the drawing.
4. Grease with the recommended lubricant a ratchet and a doggie of a ratchet of the lever of the parking brake.

The recommended lubricant: SAE J310, NLGI No. 2

5. After installation of the compensator adjust the course of the lever of the parking brake.