14.5. Forward door

Removal and installation

PERFORMANCE ORDER
1. Release a bracket of fastening of the handle of a window regulator and remove the handle. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shaft shlits.
2. Turn out the screw of fastening of the internal handle, then press the handle in the direction of loops of a door and remove it from a door upholstery.
3. Remove an internal cover and an external rear-view mirror.
4. Turn out screws of fastening of an upholstery of a door.
5. Insert a door upholstery stripper between an upholstery of a door and a door and release percussion caps. Disconnect electric sockets.
6. Remove an upholstery of a door and lower glass.
7. Turn out three screws and remove the loudspeaker from a forward door.
8. Remove a windowpane.
9. Remove an external moisture protective strip from a door.
10. Turn out screws and remove a window regulator.
11. Remove a door glass guide.
12. Remove draft and the activator of the lock from the external handle of a door.
13. Remove a door latch, the modulator and the external handle of a door.
14. Installation is carried out to the sequences, the return to removal.

Adjustment of provision of a door


PERFORMANCE ORDER
1. Check that the door is closed easily and properly. If the door has a side play, tighten bolts of fastening of hinges of a door.
2. In need of carrying out adjustment of provision of a door of rather adjacent surfaces the special tool 09793-21000 adjust loops.

Prevention

Attach a protective tape to the wing sides located opposite to a door loop.



Shock plate of a door


PERFORMANCE ORDER
1. Check that the door is closed easily and properly. If the lock of a door is put on a shock plate hardly, turn out screws of fastening of a shock plate and, moving it in the horizontal and vertical planes, achieve normal closing of a door.
2. You carry out adjustment of provision of a door of rather adjacent surfaces by movement of a shock plate in the vertical plane.

Door glass


PERFORMANCE ORDER
If glass of a door is unevenly closed, adjust the angle of installation of glass in the direction from the forward party to a back part.