db57d230

15:13. Conditioner compressor

1 – conditioner compressor;
2 – bolt, 20,4–30,6 N • m;
3 – conditioner compressor pulley;
4 – bolt, 17 N • m;
5 – arm conditioner compressor;
6 – tension roller;
7 – conditioner compressor drive belt;
8 – pulley of a bent shaft.

Removal and installation


PERFORMANCE ORDER
1. Discharge the air conditioning system.
2. Disconnect the electric socket from the electromagnetic coupling.
3. Lift the car.
4. Weaken a tension and take off a conditioner compressor drive belt.
5. If necessary turn out bolts of fastening of the forward muffler.
6. Remove a hose of a discharge and the soaking-up filter.
7. Turn out bolts of fastening of the compressor of the conditioner.
8. Remove the conditioner compressor. Immediately close all open openings and tubes for an exception of hit of moisture of air in the air conditioning system.
9. Installation is carried out to the sequences, the return to removal, taking into account the following:

– fill in fresh oil in the compressor;
– before installation of sealing rings oil them;
– do not grease connecting nuts of unions of the compressor of the conditioner;
– tighten entrance and output hoses the required moment;
– adjust a conditioner compressor drive belt tension.