db57d230

15:15. Coil of initiation of coupling

Removal

PERFORMANCE ORDER
1. Remove the plug of coupling and a pulley of the compressor of the conditioner.
2. Install the safety tool on an open opening of a shaft of the compressor.
3. Install a stripper on the compressor as it is shown in the drawing. Establish a tip of the press screw in dredging of the safety tool of a shaft of the compressor and tighten the stripper screw.
4. Tightening a wrench the stripper screw, remove the coil from the forward party of the compressor.

Prevention

Do not use pneumatic tools.



Installation

PERFORMANCE ORDER
1. Clear the coil of initiation of coupling.
2. Install the compressor vertically, shaft up, and install the coil of initiation of coupling on the forward side of the compressor. Make sure that the electric socket of the coil is located correctly.
3. Install the safety tool on an open opening of a shaft of the compressor.
4. Install the coil press fitting tool on the internal radius of the coil of excitement.
5. Tighten a wrench the tool screw before installation of the coil into place.
6. Install the plug of coupling and a pulley of the compressor of the conditioner.