db57d230

15:18. Fan and condenser

1 – condenser tank;
2 – condenser fan;
3 – bolt of fastening of the fan of the condenser;
4 – condenser.

Removal

PERFORMANCE ORDER
1. Discharge the air conditioning system.
2. Merge cooling liquid from a radiator.
3. Turn out two bolts of the top fastening of clips of a radiator and the pipeline of an air inlet.
4. Remove two clips and the pipeline of an air inlet.
5. Disconnect from a radiator entrance and output hoses.
6. Disconnect hoses from the oil heater of the transmission.
7. Disconnect sockets from the fan of a radiator and the fan of the condenser.
8. Remove assembled a radiator and the condenser.
9. Disconnect from the condenser an exhaust pipe and a tube for coolant.

Prevention

After separation of components of the air conditioning system immediately close connections by the corresponding covers for an exception of hit of moisture of air in system.
Be careful not to damage an exhaust pipe and a tube for coolant.
Be careful not to damage a condenser plate.


10. Turn out two bolts of fastening of the condenser.
11. Remove the condenser.

Check of the fan of the condenser

PERFORMANCE ORDER
1. Check operation of the fan of the condenser.
2. Check a condition of the electric socket of a plait of wires.
3. the engine of the fan rotates when giving voltage of 12 V on contacts of the socket of the engine of the fan.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. If replacement of the condenser was made, add in the oil cm3 compressor 25.
3. Pump out, load and check the air conditioning system.

Check of the condenser on the car

PERFORMANCE ORDER
1. Check condenser plates for lack of a contamination and damage. If plates are hammered, wash out them a pure stream and blow compressed air. If plates are bent, level their passatizham and the screw-driver.
2. Check places of connection of the condenser for lack of leaks.