db57d230

15:24. Fan

1 – tube of cooling of the electric motor of the fan;
2 – block of resistors;
3 – air inlet;
4 – air inlet gate shaft;
5 – top case of the fan;
6 – lower case of the fan;
7 – krylchatka of the fan;
8 – fan electric motor;
9 – fan electric motor cover.

Removal and installation

PERFORMANCE ORDER
1. Remove the dashboard.
2. Disconnect sockets from the electric motor of the fan and the block of resistors.
3. Turn out nuts and remove the evaporator block.
4. Turn out 3 nuts (or bolts) fastenings of an arm of the fan.
5. Remove the fan block.
6. Installation is carried out to the sequences, the return to removal.

Removal

PERFORMANCE ORDER
1. Disconnect a tube of cooling of the electric motor of the fan.
2. Turn out three screws and remove the fan engine.
3. Release the clamps fixing an air inlet to the top case of the fan.
4. Remove an air inlet.
5. An edge of the flat screw-driver release six clamps and divide the top and lower cases of the fan.
6. Turn out two screws and remove the fan resistor.
7. Assembly is carried out to the sequences, the return dismantling.

Check of the engine of the fan


PERFORMANCE ORDER
Give additional wires tension from the rechargeable battery to contacts and the fan engine socket. If the engine of the fan rotates, so it is serviceable.