db57d230

16:26. Windshield screen wiper engine

Removal and installation

PERFORMANCE ORDER
1. Turn off nuts and remove levers of screen wipers.
2. Uncover, located under a windshield.
3. Remove the screen wiper engine.
4. Turn out bolts and remove the screen wiper mechanism.
5. Installation is carried out to the sequences, the return to removal.

Check of frequency of work of a screen wiper

PERFORMANCE ORDER
1. Disconnect the socket from the screen wiper engine.
2. Additional wires connect the positive plug of the rechargeable battery to contact of the 6th socket, and the negative plug – to contact 3.
3. Make sure that the engine of a screen wiper works at the low frequency of rotation.
4. Additional wires connect the positive plug of the rechargeable battery to contact of the 6th socket, and the negative plug – to contact 2.
5. Make sure that the engine of a screen wiper works at the high frequency of rotation.

Check of an automatic stop of brushes in an initial state

PERFORMANCE ORDER
1. Turn on the engine at a low frequency of rotation.
2. Having disconnected a wire from contact 3 sockets, stop the engine in any situation, except initial.
3. Connect contacts of the 3 and 5 socket.
4. Additional wires connect the positive plug of the rechargeable battery to contact of the 6th socket, and the negative plug – to contact 1.
5. Check that the engine of a screen wiper is switched off in a starting position of brushes of a screen wiper.