db57d230

17.8. Data for adjustments and control

Frequency of rotation of idling, min.-1
SOHC
800±100
DOHC
750±100
Carburetor
850±100
Ignition advancing corner to VMT
SOHC
9 ° ±5 °
DOHC
9 ° ±5 °
Carburetor
5 ° ±5 °
Belt deflection, when pressing it by effort of 98 N (10 kg) in the place located on identical removal from pulleys
Belt of the drive of the generator and pump of the amplifier of steering
7-10 mm
Belt of the drive of the drive of the generator and conditioner
New belt
5–5,5 mm
The belt which was in the use
6–7 mm
Interelectrode gap of a spark plug
1,0-1,1mm
Free wheeling of a pedal of coupling
6,13 mm
Distance from a pedal to a floor at the pressed pedal
90 mm
Coupling pedal course
145 mm
Minimum admissible distance to heads of rivets at extreme wear of frictional overlays of a clutch plate
1,1 mm
Distinction of height of the ends of a diaphragm spring
0,5 mm
Convergence of forward wheels
0±3 mm
Disorder of forward wheels
3±2 mm
Convergence of back wheels
0 ° ±30'
Disorder of back wheels
- 41 ° ±30'
Wheel beating
Steel disks
Radial
0,6
Axial
1,0
Aluminum disks
Radial
0,3
Axial
0,3
Height of installation of a pedal of a brake
163,5 mm
Brake pedal course
135 mm
Gap of the switch of stoplights
0,5-1,0 mm
Free wheeling of a pedal of a brake
3-8 mm
Distance from the pressed brake pedal to a floor
50 mm
Gap between a pusher of the vacuum amplifier of brakes and the main brake cylinder
0 mm
The course of the lever of the parking brake, when tightening by its effort of 196 N
6-7 clicks
Minimum admissible thickness of overlays of front brake shoes
2,0 mm
Minimum admissible thickness of a brake disk
17 mm
Beating of a brake disk
0,05 mm
Minimum admissible thickness of overlays of back brake shoes
1,0 mm
The most admissible diameter of boring of the brake drum
182 mm
The most admissible gap of the piston in the working brake cylinder
0,15 mm
Air gap of the sensor of frequency of rotation of a wheel
0,2-1,2 mm