db57d230

2.1.3. Check of a tension of a gear belt

PERFORMANCE ORDER
1. Turn a bent shaft in the direction counterclockwise in situation on 90 ° before VMT, as shown in the drawing.

Prevention

Make sure that valves are adjusted properly.


2. Measure by the BORROUGHS BT-33-73F device a tension of a gear belt in the middle of the party of a tension.

Belt tension on the cold engine of 9,5-16,5 kg


Prevention

Establish measuring support of the device in the basis of teeths of a belt, and a measuring tip - in the middle, from a reverse side of a belt.