3.3. Oil pressure sensor

PERFORMANCE ORDER
1. The control lamp of pressure of oil lights up after inclusion of ignition and dies away after launch of the engine. If the lamp does not burn after inclusion of ignition check the oil pressure sensor, the ignition lock, a lamp and electric wires.
2. If there is tension at inclusion of ignition and there is no tension after launch of the engine, so the oil pressure sensor as it should be and it is necessary to check a lamp and electric wires.

Pressure of switching of the sensor of pressure of oil: 14,71–29,42 kPa

3. The special tool 09260-32000 tighten pressure sensor the required moment.

Inhaling moment:
The oil pressure sensor assembled with the level sensor: 8–12 N • m
Oil pressure sensor: 13–15 N • m


Check

PERFORMANCE ORDER
1. An ohmmeter check conductivity of connection between the plug of the sensor and the block of cylinders. In the absence of conductivity, replace the sensor.
2. An ohmmeter check conductivity of connection between the plug of the sensor and the block of cylinders at the put-forward sensor rod. If conductivity is available even at the put-forward rod, replace the sensor.
3. However, if there is no conductivity even at the annex of vacuum of 50 kPa to a sensor opening, the sensor works properly.