3.6. Replacement of an oil filter

All engines are equipped with a high-quality, disposable oil filter.


When replacing the motor filter be careful as oil hotter and it is possible to get burns.

1. A special key turn out an oil filter. If the rubber sealing ring of an oil filter remained on the block of cylinders, remove it.
2. Grease with a thin layer of pure engine oil a rubber sealing ring of a new oil filter.
3. Screw an oil filter before contact of a sealing ring of an oil filter with the block of cylinders then tighten it by hand.
4. Launch the engine and check lack of leak of oil.
5. Switch off the engine and wait 5 min. for running off of oil in the pallet. Check the level of engine oil and, if necessary, bring it to norm.