1. Launch the engine and leave it to work at the frequency of rotation of a bent shaft idling. |
2. Check that the cable of an accelerator has no free wheeling. |
 |
3. If the cable of an accelerator has a free wheeling, adjust it as follows:
– weaken an adjusting nut so that the lever of a butterfly valve was free; – eliminate sharp excesses of a cable of an accelerator; – to move a cable cover to the lever of a butterfly valve, rotate an adjusting nut until the beginning of movement of the lever of a butterfly valve, then turn off it on one turn back and you zakontrit an adjusting nut. |
|