db57d230

6.24. Cable and pedal of an accelerator

1 – forelock;
2 – accelerator cable;
3 – arm;
4 – the socket of the switch of an accelerator of cars with the automatic transmission;
5 – bolt, 8–12 N • m;
6 – returnable spring;
7 – accelerator pedal.

Removal

Accelerator cable


PERFORMANCE ORDER
1. Weaken an adjusting nut of a cable of an accelerator.
2. Disconnect an accelerator cable from the lever of a butterfly valve.
3. Disconnect an accelerator cable from the accelerator pedal lever.
4. Turn out two bolts of fastening of a cover of a cable of an accelerator to a partition of a motor compartment and remove it from the car.

Accelerator pedal


PERFORMANCE ORDER
1. Weaken an adjusting nut of a cable of an accelerator, disconnect an accelerator cable from the lever of a pedal of an accelerator and remove a pedal.
2. Remove a returnable spring of a pedal of an accelerator.
3. Take the forelock from an axis of a pedal of an accelerator and remove an accelerator pedal from an arm.

Check


PERFORMANCE ORDER
1. Check a cable of an accelerator and a cover of a cable for absence of damage.
2. Check smoothness of movement of a cable of an accelerator in a cover.
3. Check an accelerator pedal for lack of a bend.
4. Check a condition of a returnable spring.
5. Check a condition of a tip of a cable of an accelerator.

Installation


PERFORMANCE ORDER
1. Grease with jellied J310a NLGI lubricant of a point of turn of a pedal of an accelerator.
2. For prevention of hit of vapors and the fulfilled gases in interior of the car apply sealant on a carving of bolts of fastening of an arm of a pedal of an accelerator.
3. Make sure that the cable of an accelerator has no sharp excesses.
4. Check an accelerator cable side play.
5. Establish all details and fix by bolts and nuts, having tightened them the required moments.