db57d230

7.7. Check of high-voltage wires

PERFORMANCE ORDER
1. Disconnect high-voltage wires from candles and coils of ignition. Clear and check integrity of isolation of high-voltage wires. Check the internal surfaces of contacts of high-voltage wires for lack of corrosion or a deposit.
2. Measure by an ohmmeter resistance of high-voltage wires.
High-voltage wires of the SOHC engine
Cylinder No. 1 No. 2 No. 3 No. 4
Length, mm 605 545 450 370
Resistance (BOUGI), Ohm 2,71-4,07 2,44-3,66 2,02-3,02 1,66-2,49
Resistance (R16AIPS), Ohm 6,05-12,71 5,45-11,45 4,50-9,45 3,70-7,77
High-voltage wires of the BOHC engine
Cylinder No. 1 No. 2 No. 3 No. 4
Length, mm 560 440 360 310
Resistance (BOUGI), Ohm 2.51-3.76 1.97-2.96 1.61-2.42 1.39-2.08
Resistance (R16AIPS), Ohm 5.60-11.76 4.40-9.24 3.60-7.56 3.10-6.51

Prevention

Resistance of a high-voltage wire should not exceed 10 000 Ohms, otherwise replace a wire.