9.2.13. Replacement of a cable of the drive of a speedometer

1. Insert correctly the adapter from a reverse side into a combination of devices and fix a new cable of a speedometer.
2. Establish a sealing ring so that the attached part of a cable settled down horizontally, in relation to the car.


The cable needs to be established so that the radius of a bend of a cable was not less than 150 mm.

3. Insert a speedometer cable into the transmission and reliably fix it by a connecting nut.


If the cable is incorrectly located and unreliably connected, indications of a speedometer can be incorrect and at rotation of a cable extraneous noise can appear.